GOVERNOR AND FUEL INJECTION PUMP HOUSING REPLACEMENT

TM 5-2410-237-23

GOVERNOR AND FUEL INJECTION PUMP HOUSING REPLACEMENT

0055 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Personnel Required

Tools and Special Tools

Tool kit, general mechanic's (Item 122, WP 0250

Two

00)

Equipment Condition

Shop equipment, general purpose repair (Item 106,

Battery disconnect switch in OFF position (TM 5-

WP 0250 00)

2410-237-10)

Adapter, torque wrench (Item 9, WP 0250 00)

Hood removed (WP 0159 00)

Pin, timing (Item 66, WP 0250 00)

Fuel shutoff valve under fuel tank in OFF position

Puller group (Item 83, WP 0250 00)

(WP 0042 00)

Sling, nylon (Item 109, WP 0250 00)

Fuel injection lines disconnected (WP 0044 00)

Lifting equipment, 100 lb capacity

Governor control linkage disconnected from gover-

Materials/Parts

nor (WP 0058 00)

Oil, lubricating (Item 24, WP 0249 00)

Fuel return line disconnected (WP 0053 00)

Rag, wiping (Item 29, WP 0249 00)

Alternator loosened and V-belts removed (WP 0076

Gasket (4)

00)

O-ring (12)

Primary fuel filter assembly removed (WP 0059 00)

References

Turbocharger drain tube removed (WP 0051 00)

WP 0015 00

Secondary fuel filter assembly removed (WP 0060

00)

WP 0018 00

Tachometer drive removed (WP 0230 00)

WP 0057 00

WARNING

DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or

sparks. Fuel may ignite, causing damage to machine and injury or death to personnel or equipment dam-

age.

CAUTION

Use caution to ensure fuel system does not become contaminated. Keep work area clean. Install protective

caps and plugs as needed. Contamination of fuel system could result in premature failure.

NOTE

Use a suitable container to catch any fuel that may drain from system. Dispose of fuel IAW local policy and

ordinances. Ensure all spills are cleaned up.

0055 00-1