FUEL INJECTION LINES AND FITTINGS REPLACEMENT

TM 5-2410-237-23

FUEL INJECTION LINES AND FITTINGS REPLACEMENT

0044 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

References

Tools and Special Tools

WP 0074 00

Tool kit, general mechanic's (Item 122, WP 0250

Equipment Condition

Shop equipment, common no. 1 (Item 103, WP

Engine OFF and cool (TM 5-2410- 237-10)

Battery disconnect switch in OFF position (TM 5-

Materials/Parts

2410-237-10)

Cap set, protective (Item 2, WP 0249 00)

Tag, marker (Item 37, WP 0249 00)

WARNING

DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or

sparks. Fuel may ignite, causing damage to machine and injury or death to personnel.

REMOVAL

NOTE

10,11

Alternator and wiring must be moved

out of the way to remove fuel lines on

front part of engine.

Tag all wires to ensure correct instal-

lation.

Disconnect wires (1 and 2) from back of alternator (3)

and move wires away from fuel lines.

Disconnect wires (4 and 5) from back of alternator (3)

and move wires away from fuel lines.

Loosen capscrew (6) in pivot arm of alternator (3).

Loosen top and bottom nuts (7) on belt tightening rod

(8) to take tension off V-belts (9).

387-134

Remove capscrew (10), washer (11) and block (12)

with rod (8) and two nuts (7) from alternator (3).

Remove V-belts (9) from pulley (13) and swing alter-

nator (3) away from fuel lines.