|
|
TM 5-2410-237-23
FUEL INJECTION PUMP AND GOVERNOR TIMING AND ADJUSTMENT
THIS WORK PACKAGE COVERS
Adjust Timing by Timing Pin Method, Governor Adjustment
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Rag, wiping (Item 29, WP 0249 00)
Tool kit, general mechanic's (Item 122, WP 0250
Bolt, 3/8 in.-16NC, 2 in. long
Shop equipment, general purpose repair (Item 106,
References
Adapter, torque wrench (Item 9, WP 0250 00)
Analyzer set, engine (Item 11, WP 0250 00)
Pin, timing (Item 66, WP 0250 00)
Puller group (Item 83, WP 0250 00)
Personnel Required
Tachometer, stroboscopic (Item 119, WP 0250 00)
Two
Materials/Parts
Equipment Condition
Cap set, protective (Item 2, WP 0249 00)
Engine OFF and cool (TM 5-2410-237-10)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Fuel may ignite, causing damage to machine and injury or death to personnel or equipment dam-
age.
CAUTION
Use caution to ensure fuel system does not become contaminated. Keep work area clean. Install protective
caps and plugs as needed. Contamination of fuel system could result in premature failure.
NOTE
Use a suitable container to catch any fuel that may drain from system. Dispose of fuel IAW local policy and
ordinances. Ensure all spills are cleaned up.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |