 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-312-24-1
POWERPACK REPLACEMENT - CONTINUED
0138 00
INSTALLATION - CONTINUED
c.
Reposition flow control valve (2) with attached components at crossmember (1) and install (WP 0128 00).
d.
Connect hydraulic hoses (3) to flow control valve (2) (WP 0128 00).
e.
Connect engine oil sampling valve hose to elbow fitting at crossmember (1) (WP 0132 00).
.
2
1
3
4
5
20.
If equipped with auxiliary arctic heater, connect coolant hoses to engine.
21.
Connect propshaft to transmission (Group 120 Commercial Service Manuals).
22.
Connect ether lines to intake manifold (WP 0077 00).
23.
Connect wiring harnesses and electrical leads to engine and transmission and to engine and transmission sensors
and sending units (WP 0120 00 and Group 020 and Group 070 Commercial Service Manuals).
24.
Connect electrical cables and wires to starter (WP 0092 00).
25.
Install AC compressor and mounting bracket (WP 0155 00).
26.
Install alternator bracket and alternator (WP 0090 00).
27.
Connect air hoses to air compressor and governor (WP 0066 00).
28.
Connect hydraulic hoses to fifth wheel lift hydraulic pump (WP 0161 00).
29.
Connect hydraulic hoses to power steering hydraulic pump (WP 0140 00).
30.
Connect transmission oil cooler hoses to transmission and secure to underside of engine (WP 0029 00).
31.
Secure transmission fill dipstick tube to muffler support post (WP 0027 00).
32.
Install engine oil dipstick tube to frame (WP 0010 00).
33.
Connect oil sampling valve hoses to engine and transmission (WP 0132 00).
34.
Connect engine-to-fuel tank return line (WP 0020 00).
35.
Connect fuel/water separator-to-fuel injector pump fuel line (WP 0020 00).
36.
Connect fuel injector pump-to-secondary fuel filter fuel line (WP 0020 00).
37.
Connect secondary fuel filter-to-engine fuel line (WP 0020 00).
38.
Connect cab heater hoses to engine (WP 0056 00).
0138 00-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals