FIFTH WHEEL LIFT HYDRAULIC PUMP REPLACEMENT

TM 9-2320-312-24-1

FIFTH WHEEL LIFT HYDRAULIC PUMP REPLACEMENT

0161 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Maintenance Level

Direct Support

Rag, wiping (Item 51, WP 0165 00)

MAC Reference

Strap, tiedown (Item 57, WP 0165 00)

Group 180

Tag, marker (Item 58, WP 0165 00)

RPSTL Reference

Bolt (P/N 25K4-0004) (2)

Group 180, Figure 1

Washer, lock (P/N 361-13) (2)

Tools and Special Tools

Tool kit, general mechanic's (Item 35, WP 0166 00)

References

Shop equipment, field maintenance (Item 27, WP

Materials/Parts

Equipment Condition

Cap set, protective (Item 6, WP 0165 00)

Fifth wheel fully lowered (TM 9-2320-312-10)

Fluid, hydraulic, petroleum base (Item 25 or 26,

Engine shut down

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pres-

sure has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid

under pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an

accident occurs, see a doctor immediately. Any fluid injected into the skin must be surgically

removed within a few hours or gangrene may result.

At operating temperature, hydraulic fluid is hot. Allow hydraulic fluid to cool before disconnecting

any hydraulic lines. Failure to do so could result in serious burns.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.

Change 1