 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
WATER PUMP
This task covers:
a. Removal (page 2-408)
d.
Inspection/Replacement (page 2-412)
b. Disassembly (page 2-410)
e.
Assembly (page 2-413)
c. Cleaning (page 2-411)
f.
Installation (page 2-414)
INITIAL SETUP
Tools
Materials/Parts - Continued
Extension, 3/8-inch drive, 6-inch
Rags, wiping (item 21, Appendix C)
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Handle, ratchet, 112-inch drive
Remover and setter, stud
Personnel Required
Screwdriver, flat-tip, 3/16-inch
Socket, 3/8-inch drive, 9/16-inch
One
Vise, machinist's
Wrench, open-end, 9/16-inch
Equipment Condition
Materials/Parts
1. Fan blade and pulley removed
(page 2-431)
Gasket, water pump
2. Thermostat hoses and clamps removed
Lockwasher, water pump screws
(page 2-400)
and nut (five required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Lower radiator
Clamp (2)
Using 3/16-inch flat-tip screwdriver,
hose (1)
loosen.
2. Water pump (3)
Lower radiator
Pull off.
hose (1) with
assembled
clamp (2)
3. Clip plate (4)
Screw (6)
Using 3116-inch flat-tip screwdriver,
and clamp (5)
unscrew and take out.
4. Two pipes (7 and 8)
Clamp (5)
Take off.
5. Clip plate (4) and
Screw (10)
Using 9/16-inch, 318-inch drive socket and
filler neck (9)
ratchet handle, unscrew and take out.
2-408
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals