 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
WATER PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
24. Engine block (1)
Stud (2)
If removed, screw in and tighten using
stud remover and setter and 1/2-inch drive
ratchet handle.
25. Engine block (1)
New gasket (3)
Put in place.
and stud (2)
and water pump (4)
26. Water pump (4) and
Three new lock-
Screw in but do not tighten.
engine block (1)
washers (5) and
screws (6 and 7)
27. Water pump (4)
New lockwasher (8)
Screw on but do not tighten.
and stud (2)
and nut (9)
28. Water pump (4),
Three screws (6 and
Using 9/16-inch, 318-inch drive socket,
engine block (1)
7) and nut (9)
6-inch extension, and ratchet handle,
and stud (2)
alternately tighten.
29. Water pump (4)
Ac generator
Put in place.
and ac
adjusting strap (11)
generator (10)
Washer (12), new
Screw in but do not tighten.
ing strap (11) and
lockwasher (13),
Screw will be tightened during
water pump (4)
and screw (14)
v-belt installation.
31. Water pump (4)
Two hoses (15 and
Push on.
16) with assembled
two clamps (17)
32. Two hoses (15
Two clamps (17)
Using 3/16-inch flat-tip screwdriver,
and 16)
tighten.
33. Filler neck (18)
Clip plate (19)
Put in place.
34. Clip plate (19) and
Screw (20)
Screw in and tighten using 9/16-inch,
filler neck (18)
3/8-inch drive socket and ratchet
handle.
35. Two pipes (21
Clamp (23)
Put on..
and 22)
2-414
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals