 |
|||
|
|
|||
|
Page Title:
LUBRICATING COOLER (ENGINE OIL COOLER) |
|
||
| ||||||||||
|
|
 TM 5-2420-222-20-1
LUBRICATING COOLER (ENGINE OIL COOLER)
This task covers:
a. Removal (page 2-156)
e.
Repair (page 2-158)
b. Disassembly (page 2-157)
f.
Assembly (page 2-159)
c. Cleaning (page 2-158)
g.
Installation (page 2-160)
d. Inspection/Replacement (2-158)
INITIAL SETUP:
Tools
Materials/Parts
Driftpin, brass-tipped, 3/4-inch
Packing, cooler
File, thread restorer
Rags, wiping (item 21, Appendix C)
Harrlmer, ball-peen, 1-pound head
Solvent, drycleaning (item 28, Appendix C)
Hand pump, flow control valve,
handle, and pressure gage
Personnel Required
Handle, ratchet, 1/2-inch drive
Knife, pocket
One
Pan, drain
Puller kit, mechanical, slide
Equipment Condition
hammer type
Screwdriver, flat-tip, 114-inch
1. Radiator drained (page 2-368)
Socket, 1/2-inch drive, 1 1116-inch
2. Engine oil filter element removed
Thread set, pipe
(page 2-168)
Wrench, open-end, 5/16-inch
Wrench, torque, 112-inch drive,
0 to 150 foot-pound capacity
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Cooler (1)
Plug (2)
a. Place drain pan underneath.
b. Using 5/16-inch open-end wrench,
unscrew and take out.
c. Let oil drain completely.
d. Get rid of drained oil (page 2-137).
2. Two hoses (3)
Two clamps (4)
a. Place drain pan underneath.
b. Using 1/4-inch flat-tip screwdriver,
loosen.
3. Cooler (1)
Two hoses (3) with
a. Take off.
assembled clamps (4)
b. Let coolant drain completely.
c. Get rid of drained coolant
(page 2-137).
2-156
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals