 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
ENGINE OIL FILTER ELEMENT
This task covers:
a. Removal (page 2-168)
b. Disassembly (page 2-168)
INITIAL SETUP:
Tools
Materials/Parts
Handle, ratchet, 112-inch drive
Filter element
Pan, drain
Oil, engine (LO 52420-222-12)
Removal tool, oil filter
Rags, wiping (item 21, Appendix C)
Socket, 1/2-inch drive, 1-inch
Personnel Required
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Nipple (1) and
Filter element (3)
a. Place drain pan under cooler (2) to
cooler (2)
catch draining oil.
b. Using oil filter removal tool, 1-inch,
1/2-inch drive socket and ratchet
handle, unscrew and take out.
c. Get rid of.
d. `Get rid of drained oil (page 2-168).
INSTALLATION
CAUTION
Do not overtighten filter element. Element may be damaged and leak.
2. Nipple (1) and
New filter
a. Using clean, dry rags, wipe sealing
cooler (2)
element (3)
surfaces of cooler (2) clean.
b. Apply thin film of engine oil to seal-
ing ring.
c. Screw on until sealing ring contacts
cooler (2).
d. Tighten one-half to three-quarter turn.
3. Loader backhoe
Engine
Check oil level and add proper amount and
grade (page 2-168).
2-168
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals