|
|
TM 5-2410-237-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 3. Steering System Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
Tractor Will Not Turn in One Direction.
1.
Inspect steering clutches
Replace damaged linkage (WP
control linkage for damage.
2.
Check steering clutches
Adjust steering control linkage
control linkage travel.
If shaft moves, repair or replace
3.
Operate steering control
lever for direction with
steering clutch control valve
problem
and
observe
steering clutch control
valve shaft operation.
4.
If problem still exists, check
Repair steering clutch,
if
steering clutch piston.
necessary (WP 0152 00).
2.
Tractor Will Not Turn in Either Direction.
1.
Check steering clutches
1. Adjust
steering
control
control linkage travel.
linkage (WP 0147 00).
2. Replace damaged steering
control linkage (WP 0148
2.
Check steering brakes
1. Adjust brakes control linkage
control linkage travel.
2. Replace damaged brakes
control linkage (WP 0146
3.
Check steering clutch oil
Replace damaged oil lines and/
lines for leaks.
or O-rings (WP 0151 00).
If
necessary,
replace
4.
Check transmission oil
pump pressure (WP 0122
transmission oil pump (WP 0118
1. Repair or replace steering
5.
Perform steering clutch
piston and brake boosters
clutch control valve (WP
pressure checks (WP 0122
2. Repair steering clutches (WP
Repair or replace linkage
3.
Tractor Turns in Either Direction When
1.
Check steering clutch and
brake control linkages for
Both Steering Control Levers are Pulled at
components (WP 0146 00 and
damage.
the Same Time.
2.
Check steering clutches
Adjust steering control linkage
control linkage travel.
1. Repair or replace steering
3.
Perform steering clutch
piston and brake boosters
clutch control valve (WP
pressure checks (WP 0122
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |