STEERING BRAKE HYDRAULIC CONTROL ASSEMBLY MAINTENANCE

TM 5-2410-237-23

STEERING BRAKE HYDRAULIC CONTROL ASSEMBLY MAINTENANCE

0151 00

THIS WORK PACKAGE COVERS

Removal, Disassembly, Cleaning, Inspection, Assembly, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

O-ring (39 and 60)

Took kit, general mechanic's (Item 122, WP 0250

00)

Pin, cotter (9, 16, 73 and 87)

Plug (71 and 94)

Shop equipment, general purpose repair (Item 106,

WP 0250 00)

Screw, forcing, 1/2 in. -13 NC x 4 in. long (51)

Seal (95 and 97)

Link, lifting (Item 50, WP 0250 00)

References

Lifting equipment, 100 lb capacity

TM 5-2410-237-10

Bolt, 1/2-13 x 1-1/2 in.

WP 0107 00

Materials/Parts

WP 0241 00

Cap set, protective (Item 2, WP 0249 00)

Personnel Required

Cleaning compound, solvent (Item 4, WP 0249 00)

Two

Compound, gasket forming, silicone (Item 7, WP

Equipment Condition

0249 00)

Fuel tank removed (WP 0052 00)

Oil, lubricating (Item 23, 24, 25 or 26, WP 0249 00)

Seat and seat base assembly removed (WP 0172 00)

Floor plates removed (WP 0171 00)

Rag, wiping (Item 29, WP 0249 00)

ROPS removed (WP 0164 00)

Tag, marker (Item 37, WP 0249 00)

Brake lock lever removed (WP 0149 00)

Gasket (23 and 101)

Hydraulic tank mounting brackets removed (WP

Lockwasher (2, 5, 21, 68 and 69)

0156 00)

REMOVAL

CAUTION

Wipe area clean around all hydraulic connections to be opened during removal and disassembly. Cap oil

lines and plug openings after removing lines. Contamination of steering brake system could result in pre-

mature failure.

NOTE

This procedure is to be used for either R.H. or L.H. steering brake hydraulic control assembly.

Tag hydraulic lines, fuel lines and other components as needed to ensure correct installation.

0151 00-1