|
|
TM 5-2410-237-23
STEERING CLUTCH LEVERS AND LINKAGE ADJUSTMENT
THIS WORK PACKAGE COVERS
Adjustment
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Pin, cotter (6 and 14)
Tool kit, general mechanic's (Item 122, WP 0250
References
Shop equipment, common no. 1 (Item 103, WP
TM 5-2410-237-10
Equipment Condition
Materials/Parts
Battery cables disconnected (WP 0101 00)
Floor plates removed (WP 0171 00)
Lockwasher (2)
WARNING
Ensure battery cables are disconnected before performing maintenance inside dash assembly. Failure to
follow this warning could result in injury or damage to equipment.
ADJUSTMENT
NOTE
Ensure all linkage mounting bolts are tight before performing adjustment.
Adjustment of one steering clutch lever and linkage is described. Both are adjusted the same way.
When either side is adjusted, adjustment of other side should be performed.
1.
Remove four capscrews (1), lockwashers (2), washers
5
1, 2, 3
(3) and cover (4) from top of dash assembly (5). Dis-
card lockwashers.
4
387-045
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |