GROUND HANDLING PROCEDURES - TM-5-2410-233-230873

TM 5-2410-233-23

GROUND HANDLING PROCEDURES

0178 00

THIS WORK PACKAGE COVERS

Operating/Adjusting Hydraulic Jack Stands, Raising Tractor off Ground, Lowering Tractor to Ground

INITIAL SETUP

Tools and Special Tools - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

Stand assembly (Item 104, WP 0185 00)

00)

Stand, lifting (Item 105, WP 0185 00)

Shop equipment, common no. 2 (Item 95, WP 0185

Tee, pipe (Item 110, WP 0185 00)

00)

Tool, special (Item 115, WP 0185 00)

Cap, protective, dust (Item 15, WP 0185 00)

Valve, needle (Item 116, WP 0185 00)

Collar, shaft (Item 17, WP 0185 00)

Coupling assembly (Item 18, WP 0185 00)

Materials/Parts

Coupling half, quick (Item 19, WP 0185 00)

Wood blocks, 8 in. x 8 in. x 18 in. long

Cylinder assembly, actuating (Item 22, WP 0185

References

00)

WP 0120 00

Hose assembly (Item 32, WP 0185 00)

Nipple, pipe (Item 47, WP 0185 00)

Personnel Required

Pin, shoulder (Item 57, WP 0185 00)

Two

Plug, pipe (Item 66, WP 0185 00)

Equipment Condition

Plug, protective, dust (Item 67, WP 0185 00)

Blade and pusharm assembly removed (WP 0170

Pumping unit, hydraulic (Item 85, WP 0185 00)

00)

Reducer, pipe (Item 87, WP 0185 00)

Rear implement removed (WP 0173 00 for ripper or

WP 0139 00 for winch)

Reducer, pipe (Item 88, WP 0185 00)

Repair tool, special purpose (Item 91, WP 0185 00)

Track tension released, if required (WP 0119 00)

WARNING

This task must be performed on a flat, level concrete surface. Hydraulic jack stands can

become unstable if used on any other surface. Instability could cause tractor to fall, causing

personal injury or death.

All damage or leaks to hydraulic jack stands must be repaired before use. Failure to make

repairs can cause injury or death.

Always use handle any time extension tube on hydraulic jack stand is manually extended or

retracted. Failure to follow this warning may cause injury.

0178 00-1