TRACK ROLLER FRAME ASSEMBLY REPLACEMENT

TM 5-2410-233-23

TRACK ROLLER FRAME ASSEMBLY REPLACEMENT

0110 00

THIS WORK PACKAGE COVERS

Removal, Installation, Alignment

INITIAL SETUP

References

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

TM 5-2410-233-10

00)

WP 0118 00

Shop equipment, general purpose repair (Item 97,

WP 0185 00)

WP 0120 00

Link, lifting, (Item 44, WP 0185 00)

WP 0178 00

Puller, ratchet lever, cable type (Item 82, WP 0185

Personnel Required

00)

Lifting equipment, 5,000 lb capacity

Three

Bolt, 3/4 -10 x 1-1/2 in.

Equipment Condition

Materials/Parts

Track removed (WP 0119 00)

Lockwasher (7, 13 and 16)

Track roller frame guards removed (WP 0111 00)

Wood block, 4 in. x 4 in. x 12 in.

REMOVAL

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.

NOTE

Weight of an assembled track roller frame is 4,000 lb (1,804 kg).

Attach ratchet puller to front of track roller frame (1).

2,3

Install two lifting links (2) with 3/4 -10 x 1-1/2 in.

bolts and attach a suitable lifting device to both points

6,7

on front of track roller frame (3 and 4).

Insert a block of wood between equalizer bar and

frame.

Attach ratchet puller to lifting device at point (4).

Lift track roller frame (1) and use ratchet puller to

raise evenly and remove tension on equalizer bar (5).

Remove four capscrews (6) and lockwashers (7) that

386-218

secure front support assembly (3) to track roller frame

(1). Discard lockwashers.

0110 00-1