 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK ROLLERS REPLACEMENT - CONTINUED
0109 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
Use assistance and extreme caution when using a chain and tanker bar to stabilize track
roller. Ensure track roller is securely supported.
NOTE
Weight of a single-flanged roller is 195 lb (88 kg). Weight of a double-flanged roller is 215 lb (98 kg).
1.
Attach a suitable lifting device to chain and pry bar under track roller (3) to hold roller in position.
2.
Install track roller (3) in lock collar (4) and position track roller.
3.
Adjust track to tighten (WP 0120 00) so track roller is placed into position and aligned with holes.
4.
Install four new lockwashers (2) and capscrews (1) to secure track roller (3). Tighten capscrews to 550 lb-ft (746 Nm).
386-214
5.
Lower machine to ground (WP 0178 00).
6.
Adjust track (WP 0120 00).
7.
Install outer track roller guard (WP 0112 00).
8.
Test drive and check track for proper operation (TM 5-2410-233-10).
END OF WORK PACKAGE
0109 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals