TRACK ROLLER FRAME GUARDS REPLACEMENT

TM 5-2410-233-23

TRACK ROLLER FRAME GUARDS REPLACEMENT

0111 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Personnel Required

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

Two

Equipment Condition

Materials/Parts

Compound, antiseize (Item 6, WP 0184 00)

Machine parked on level ground (TM 5-2410-233-

Lockwasher (2, 6, 10 and 14)

10)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Failure to follow this warning may result in injury.

REMOVAL

NOTE

Guard (4) weighs 23 lb (10 kg).

Remove five bolts (1), lockwashers (2), washers (3) and guard (4) from front end of track roller frame. Discard lock-

washers.

NOTE

Guard (8) weighs 37 lb (17 kg). All other guards weigh less than 23 lb (10 kg).

Remove eight bolts (5), lockwashers (6), washers (7) and guard (8) from center of roller frame. Discard lockwashers.

Remove five bolts (9), lockwashers (10), washers (11) and guard (12). Discard lockwashers.

Remove three bolts (13), lockwashers (14), washers (15) and guard (16) from rear end of roller frame. Discard lock-

washers.

5,6,7

1,2,3

13,14,15

9,10,11

387-311