CAB TILT HYDRAULIC HOSES AND FITTINGS REPLACEMENT

TM 9-2320-312-24-1

CAB TILT HYDRAULIC HOSES AND FITTINGS REPLACEMENT

THIS WORK PACKAGE COVERS

Pump-to-Tilt Cylinder Hoses: Removal, Installation

Cab Tilt Latch Hose: Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Maintenance Level

Unit

Rag, wiping (Item 51, WP 0165 00)

Strap, tiedown (Item 57, WP 0165 00)

MAC Reference

Group 190

Tag, marker (Item 58, WP 0165 00)

Nut, lock (P/N 21NE048) (1) (cab tilt latch hose)

RPSTL Reference

Group 190, Figure 2

Nut, lock (P/N 21NE048) (4) (pump-to-cylinder

hoses)

Tools and Special Tools

References

Tool kit, general mechanic's (Item 35, WP 0166 00)

Shop equipment, common no. 1 (Item 28, WP 0166

Equipment Condition

Materials/Parts

Cab lowered

Cap set, protective (Item 6, WP 0165 00)

Wheel turned full left

Fluid, hydraulic, automatic transmission, Dexron

III (Item 24, WP 0165 00)

Battery disconnect switch in OFF position

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure

has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under

pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-

dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed

within a few hours or gangrene may result.

At operating temperature, hydraulic fluid is hot. Allow hydraulic fluid to cool before disconnecting any

hydraulic lines. Failure to do so could result in serious burns.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.