CAB TILT HYDRAULIC SYSTEM FILLING AND BLEEDING

TM 9-2320-312-24-1

CAB TILT HYDRAULIC SYSTEM FILLING AND BLEEDING

0125 00

THIS WORK PACKAGE COVERS

Filling and Bleeding

INITIAL SETUP

Materials/Parts

Maintenance Level

Cap set, protective (Item 6, WP 0165 00)

Unit

Fluid, hydraulic, automatic transmission, Dexron

MAC Reference

III (Item 24, WP 0165 00)

Group 190

Rag, wiping (Item 51, WP 0165 00)

RPSTL Reference

Equipment Condition

Group 190, Figure 5

Cab fully lowered (TM 9-2320-312-10)

Tools and Special Tools

Tool kit, general mechanic's (Item 35, WP 0166 00)

Shop equipment, common no. 1 (Item 28, WP 0166

WARNING

DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure

has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under

pressure can penetrate the skin, causing serious injury.

Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-

dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed

within a few hours or gangrene may result.

At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any

hydraulic lines. Failure to do so could result in injury.

Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may

result in injury to personnel.