BLADE TILT CYLINDER REPAIR - TM-5-2410-233-230745

TM 5-2410-233-23

BLADE TILT CYLINDER REPAIR

0155 00

THIS WORK PACKAGE COVERS

Disassembly, Cleaning and Inspection, Assembly

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Rag, wiping (Item 28, WP 0184 00)

Tool kit, general mechanic's (Item 112, WP 0185

Sealant, quick-cure (Item 29, WP 0184 00)

Lockwasher (4)

Shop equipment, general purpose repair (Item 97,

Nut, self-locking (8)

Guide, seal (Item 27, WP 0185 00)

O-ring (11)

Ring, backup (12)

Inserter, seal (Item 38, WP 0185 00)

Ring, piston (16)

Materials/Parts

Seal (10, 14 and 15)

Cap set, protective (Item 2, WP 0184 00)

Personnel Required

Cleaning compound, solvent (Item 4, WP 0184 00)

Two

Cloth, abrasive, emery (Item 5, WP 0184 00)

Equipment Condition

Blade tilt cylinder removed (WP 0154 00)

Oil, lubricating (Item 22, 23 or 24, WP 0184 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.

CAUTION

Wipe area clean around all hydraulic connections to be opened during disassembly. Install protective caps

and plugs as needed. Contamination of hydraulic system could result in premature failure.

NOTE

Use a suitable container to catch any hydraulic oil that may drain from cylinder. Dispose of oil

IAW local policy and ordinances. Ensure all spills are cleaned up.

Tilt cylinder weighs 418 lb (190 kg).

0155 00-1