 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE TILT CYLINDER REPAIR - CONTINUED
0155 00
DISASSEMBLY
NOTE
Prior to disassembly of tilt cylinder, inspect external casing for serviceability (cracks and damage). If not
serviceable, replace tilt cylinder.
1.
Scribe a mark on head (1) and cylinder housing (2) for correct alignment at assembly.
2.
Remove four capscrews (3) and lockwashers (4) from head (1). Discard lockwashers.
3.
Pull piston rod (5) and piston assembly slowly from cylinder housing (2) to allow oil to escape.
4.
Inspect bearing sleeve (6) for serviceability. Replace tilt cylinder if not serviceable.
CAUTION
Protect piston rod and use care when placing into vise.
5.
Place piston rod (5) in vise and remove self-locking nut (8) from piston rod. Discard self-locking nut.
6.
Remove piston (7) from piston rod (5).
3
4
1
7
8
2
5
6
386-605
0155 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals