HYDRAULIC TILT CONTROL VALVE REPLACEMENT

TM 5-2410-233-23

HYDRAULIC TILT CONTROL VALVE REPLACEMENT

0150 00

THIS WORK PACKAGE COVERS

Removal, Inspection, Relief Valve Setting Adjustment, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Lockwasher (5, 7, 12, 14, 19 and 24)

Tool kit, general mechanic's (Item 112, WP 0185

O-ring (15 and 17)

Shop equipment, common no. 1 (Item 94, WP 0185

References

00)

TM 5-2410-233-10

Materials/Parts

Cap set, protective (Item 2, WP 0184 00)

Personnel Required

Two

Compound, gasket forming (Item 7, WP 0184 00)

Equipment Condition

Oil, lubricating (Item 22, 23 or 24, WP 0184 00)

Hydraulic tank drained (WP 0165 00)

Rag, wiping (Item 28, WP 0184 00)

Floor plates removed (WP 0135 00)

Tag, marker (Item 35, WP 0184 00)

Blade control lever and linkages disconnected (WP

Gasket (10)

REMOVAL

CAUTION

Wipe area clean around all hydraulic connections to be opened during removal.

Cap oil lines and plug opening after removing lines. Contamination of hydraulic system could

result in premature failure.

NOTE

Blade tilt control valve and mounting plate can be removed from hydraulic tank without

removing tank from machine.

Use a suitable container to catch any hydraulic oil that may drain from system. Dispose of oil

IAW local policy and ordinances. Ensure all spills are cleaned up.

Tag all oil lines prior to removal to assist in installation.