 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
HYDRAULIC TILT CONTROL VALVE REPLACEMENT - CONTINUED
0150 00
REMOVAL - CONTINUED
1.
Disconnect hydraulic lines (1 and 2) from manifold (3).
2.
Remove two capscrews (4) and lockwashers (5) from manifold (3). Discard lockwashers.
3.
Remove 18 capscrews (6) and lockwashers (7) from mounting plate (8) on hydraulic tank (9). Discard lockwashers.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may result in injury.
NOTE
Tilt control valve, manifold and mounting plate as an assembly weighs 70 lb (35 kg).
Tilt control valve is mounted to back surface of mounting plate.
4.
With assistance, remove mounting plate (8), manifold (3), and tilt control valve as an assembly from hydraulic tank (9).
Remove gasket (10) and discard.
8
9
6,7
9
4,5
3
386-743
1,2 (HIDDEN)
10 (HIDDEN)
386-745
0150 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals