 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
WINCH CONTROL VALVE REPLACEMENT - CONTINUED
0140 00
INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Position three new O-rings (23) on control valve (20).
2.
Position new gasket (24) on mating surface of winch.
3.
Place control valve (20) into position on winch.
NOTE
Note size of socket head capscrews and their mounting location to ensure correct installation.
4.
Install two new lockwashers (22) and 4 in. socket head capscrews (21) to secure control valve (20).
5.
Install two new lockwashers (19) and 5-3/4 in. long allen capscrews (18) to secure control valve (20).
6.
Connect hydraulic hose (17) and tighten connector (16).
7.
Connect hydraulic hose (15) and tighten connector (14).
8.
Connect tube (13) and tighten connector (12).
9.
Connect tube (11) and tighten connector (10).
10.
Connect winch gear pump pressure hose (WP 0147 00).
11.
Install winch control lever and cable (WP 0142 00).
12.
Perform winch control lever and cable adjustment (WP 0141 00).
13.
Position new gasket (9) and side access cover (8) on valve housing (5). Install six new lockwashers (7) and capscrews
(6).
14.
Position new gasket (4) and top access cover (3) on valve housing (5). Install six new lockwashers (2) and capscrews
(1).
15.
Check winch oil level and add as needed (WP 0138 00).
16.
Check winch for proper operation and leaks (TM 5-2410-233-10).
END OF WORK PACKAGE
0140 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals