 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
WINCH CONTROL VALVE REPLACEMENT - CONTINUED
0140 00
REMOVAL
1.
Remove six capscrews (1), lockwashers (2) top access cover (3) and gasket (4) from valve housing (5). Discard lock-
washers and gasket.
2.
Remove six capscrews (6), lockwashers (7), side access cover (8) and gasket (9) from valve housing (5). Discard lock-
washers and gasket.
3.
Disconnect winch gear pump pressure hose (WP 0147 00).
4.
Remove winch control lever and cable (WP 0142 00).
NOTE
Remove and discard all O-rings.
5.
Disconnect connector (10) and remove tube (11).
6.
Disconnect connector (12) and remove tube (13).
7.
Disconnect connector (14) and remove hydraulic hose (15).
8.
Disconnect connector (16) and remove hydraulic hose (17).
1, 2
3,4
10
18,19
11
13
20
12
9
21,22
8
386-077
386-077
17
15
6,7
14
5
16
NOTE
If valve is to be replaced, transfer elbows and fittings to new valve. Use new O-rings.
Note size of socket head capscrews and their mounting location to ensure correct installation.
9.
Remove two 5-3/4 in. long socket head capscrews (18)
and lockwashers (19) from control valve (20). Discard
lockwashers.
10.
Remove two 4 in. socket head capscrews (21) and
lockwashers (22) from control valve (20). Discard
lockwashers.
23
11.
Remove control valve (20) from winch. Remove and
discard three O-rings (23) and gasket (24).
20
22
386-428
0140 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals