CHANGING WINCH ASSEMBLY OIL - TM-5-2410-233-230661

TM 5-2410-233-23

CHANGING WINCH ASSEMBLY OIL

0138 00

THIS WORK PACKAGE COVERS

Draining Oil, Refilling Oil

INITIAL SETUP

References

Applicable Configuration

Tractor with winch

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185 00)

Equipment Condition

Shop equipment, common no. 1 (Item 94, WP 0185

Machine parked on level ground (TM 5-2410-233-

10)

Materials/Parts

Winch oil warm (winch operated for about 5 min-

utes) (TM 5-2410-233-10)

Oil, lubricating (Item 22, 23, 24 or 25, WP 0184 00)

Rag, wiping (Item 28, WP 0184 00)

Engine OFF and cool (TM 5-2410-233-10)

DRAINING OIL

CAUTION

Wipe area clean around plugs before they are removed to prevent contamination of winch oil.

NOTE

Place a suitable container under winch drain and filler plugs to collect oil. Dispose of oil IAW

local policy and ordinances. Ensure all spills are cleaned up.

Winch assembly oil capacity is approximately 16 gal. (60.6 l).

Remove fill plug (1).

Remove drain plug (2) and allow oil to drain completely.

NOTE

If noticeable amounts of metal particles are present in winch oil, replacement of winch may be required.

Inspect winch oil and drain plug (2) for metal particles. Wipe drain plug clean and reinstall.

386-039

386-038

Replace winch oil filter (WP 0143 00).