 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
WINCH ASSEMBLY REPLACEMENT - CONTINUED
0139 00
INSTALLATION - CONTINUED
NOTE
When installing transmission cover, be careful to ensure dent ball and spring is positioned correctly.
13.
Position new gasket (3) and transmission cover (4) on
4
3 (HIDDEN)
1, 2
winch and secure with seven new lockwashers (2) and
capscrews (1).
386-045
14.
Install suction hose to oil filter assembly housing (WP 0143 00).
15.
Install linkage to winch control valve (WP 0142 00).
16.
Adjust linkage (WP 0141 00).
NOTE
As required, perform the following step to install winch gear pump, if it was removed prior to removing
winch.
17.
Remove plate and install winch gear pump (WP 0147 00).
18.
Fill winch oil to proper level (WP 0138 00).
19.
Check winch for proper operation and leaks.
20.
Recheck oil level and add oil as needed (WP 0138 00).
END OF WORK PACKAGE
0139 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals