TRANSMISSION AND CRANKCASE GUARDS REPLACEMENT

TM 5-2410-233-23

TRANSMISSION AND CRANKCASE GUARDS REPLACEMENT

0129 00

THIS WORK PACKAGE COVERS

Transmission Guard: Removal, Installation

Crankcase Guard: Removal, Installation

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Lockwasher (3, 5, 10 and 12)

Tool kit, general mechanic's (Item 112, WP 0185

References

WP 0178 00

Shop equipment, common no. 1 (Item 94, WP 0185

Personnel Required

Two

Materials/Parts

Equipment Condition

Compound, antiseize (Item 6, WP 0184 00)

Machine parked on level ground (TM 5-2410-233-

Wood block, 2 in. x 4 in. x 18 in. long

10)

Engine OFF and cool (TM 5-2410-233-10)

Clip, retaining (7)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance

during procedure. Ensure that any lifting device used is in good condition and of suitable load

capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this

warning may result in injury or death to personnel.

Dirt and rocks under guards can significantly add to their weight.

NOTE

Transmission guard weighs 350 lb (159 kg).

Crankcase guard weighs 335 lb (152 kg).

0129 00-1