|
|
TM 5-2410-233-23
TRACK ROLLERS REPLACEMENT - CONTINUED
0109 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance
during procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
Use assistance and extreme caution when using a chain and tanker bar to stabilize track
roller. Ensure track roller is securely supported prior to loosening mounting hardware.
NOTE
Weight of a single-flanged roller is 195 lb (88 kg). Weight of a double-flanged roller is 215 lb
(98 kg).
To remove an end roller, it may be necessary to remove roller next to it for clearance.
1.
Adjust track (WP 0120 00) until it is tight against track rollers.
NOTE
A single-flanged roller is illustrated. Location of capscrews is the same for both single-flanged and double-
flanged rollers.
2.
Attach a suitable lifting device to chain and pry bar under track roller (3) to hold roller in position.
3.
Remove four capscrews (1) and lockwashers (2) that secure track roller (3) in place. Discard lockwashers.
4.
Open track adjusting relief valve (WP 0120 00). Lower track until track roller clears frame.
5.
Remove lock collar (4) and track roller (3).
4
2
1
2
3
1
386-030
0109 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |