TRACK ROLLER GUARD REPLACEMENT

TM 5-2410-233-23

TRACK ROLLER GUARD REPLACEMENT

0112 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

Two wood blocks, 4 in. x 4 in. x 20 in. long

Personnel Required

Shop equipment, common no. 2 (Item 82, WP 0185

Two

Materials/Parts

Equipment Condition

Compound, antiseize (Item 6, WP 0184 00)

Machine parked on level ground (TM 5-2410-233-

Lockwasher (2 and 6)

10)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Failure to follow this warning may result in injury or death to personnel.

NOTE

Inner guard weighs 133 lb (60 kg).

Outer guard weighs 161 lb (73 kg).

Right-side inner and outer track roller guards are replaced in this task. Left-side inner and

outer track roller guards are replaced the same way.

REMOVAL

Remove five nuts (1) and lockwashers (2). Push rods (3) through outer guard (4). Discard lockwashers.

386-257