BEVEL GEAR AND SHAFT REPLACEMENT - TM-5-2410-233-230487

TM 5-2410-233-23

BEVEL GEAR AND SHAFT REPLACEMENT

0102 00

THIS PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Tools and Special Tools

Tool kit, general mechanic's (Item 112, WP 0185

Capscrew, forcing, 1/2 in. - 13NC

Lockwasher (6 and 8)

Shop equipment, general purpose repair (Item 97,

Wood, block 2 in. x 4 in. x 2 ft long

Bushing driver set (Item 14, WP 0185 00)

References

Sling, nylon (Item 100, WP 0185 00)

TM 5-2410-233-10

Lifting equipment, 100 lb capacity

Personnel Required

Materials/Parts

Two

Pigment, paint products (Item 26, WP 0184 00)

Equipment Condition

Rag, wiping (Item 28, WP 0184 00)

Fuel tank removed (WP 0049 00)

Sealing compound (Item 31, WP 0184 00)

Steering clutch hubs removed (WP 0128 00)

Tag, marker (Item 35, WP 0184 00)

Final drive drained (WP 0099 00)

Bar stock, 1/4 in. x 1 in. x 8 in. long

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.