STEERING CLUTCH HUB REPLACEMENT - TM-5-2410-233-230625

TM 5-2410-233-23

STEERING CLUTCH HUB REPLACEMENT

0128 00

THIS WORK PACKAGE COVERS

Removal, Cleaning, Installation

INITIAL SETUP

Tools and Special Tools

Materials/Parts

Grease, GAA (Item 15, WP 0184 00)

Tool kit, general mechanic's (Item 112, WP 0185

Oil, lubricating (Item 24, WP 0184 00)

Shop equipment, general purpose repair (Item 97,

Rag, wiping (Item 28, WP 0184 00)

Bolt, 3/4 in. -10NC, 9 in. long

Adapter (Item 1, WP 0185 00)

Packing, preformed (13)

Bolt, machine (Item 12, WP 0185 00)

Retainer (5)

Puller (Item 69, WP 0185 00)

Ring (4, 10 and 11)

Screw, anchor (1), 3/8 in. -16NC, 3 in. long

Puller, hydraulic (Item 78, WP 0185 00)

Puller, mechanical (Item 81, WP0185 00)

References

TM 5-2410-233-10

Screw, cap, hexagon head (Item 93, WP 0185 00)

Spacer (Item 102, WP 0185 00)

Equipment Condition

Steering clutch removed (WP 0127 00)

Washer (Item 117, WP 0185 00)

REMOVAL

NOTE

This procedure applies to R.H. or L.H. steering clutch hub.

Ensure anchor screws are turned evenly during removal.

Install two 3/8 in. anchor screws (1) and remove

piston (2) from steering clutch hub (3).

Remove ring (4) from piston (2). Discard ring.

386-374