|
|
TM 9-2320-364-20-1
A4 CODE 33 TURBO BOOST SENSOR (TBS) SIGNAL VOLTAGE HIGH (CONT).
6.
KNOWN INFO
TEST OPTIONS
WARNING
Read WARNING
CHECK ENGINE light (CEL)
Resistance test.
on Page 2-271
comes ON and stays ON.
STE/ICE-R #92.
Wire 452 not open.
Are there
TBS connector OK.
REASON FOR QUESTION
10,000 ohms measured
TBS sensor OK.
between vehicle harness
Wires 416 and 432 not shorted.
Resistance less than or equal to
connector, terminals W1 and
10,000 ohms at vehicle harness,
P1 and between terminals P1
POSSIBLE PROBLEMS
engine harness or power
and power connector
harness connectors indicates a
terminals A, B, E and F?
Wires 439, 432, 241 and/or 240
short between terminals where
shorted.
measured.
DDEC ECM connector faulty.
Repair wires 432,
DDEC ECM faulty.
439, 241 and/or 240
(see schematic
NO
Fig 2-2) or notify DS
Maintenance.
Verify repair, go to
Step 8 of this Fault.
YES
2-270
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |