Table 22-3. Third Clutch Pack Height

TM 9-2320-360-34-2

22-16. PLANETARY GEARING, SHAFTS, AND THIRD CLUTCH REPAIR (CONT)

(6.1) Stack eight steel plat es (1) and seven

friction plates (2) on flat surface of suitable

hydraulic press, starting with a steel plate

and alternating with a friction plate.

(6.2) Place third clutch piston (3) on top of

clutch plates (1 and 2).

(6.3) Press evenly on third clut ch piston (3) with

100 psi load.

(6.4) Measure distance from base of clutch

plates (1 and 2) to top of third clutch

piston (3).

(6.5) From Table 22-3, select the proper steel

plate combination to obtain 3.20143.1794

in. (81.3280.76 mm) height. Tie these

parts together and tag for subsequent

assembly.

Table 22-3. Third Clutch Pack Height

PLATE

FROM

6834488

6834720

3.2280

3.2147

ADD 2

REMOVE 2

3.2147

3.2014

ADD 1

REMOVE 1

3.2014

3.1794

3.1661

REMOVE 1

ADD 1

3.1661

3.1528

REMOVE 2

ADD 2

22-90 Change 3