Injection Actuation Pressure Sensor

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

NOTICE

Care must be taken to ensure that fluids are contained

during performance of inspection, maintenance, test-

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

ing any compartment or disassembling any compo-

nent containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

products.

Dispose of all fluids according to local regulations and

mandates.

g00771060

Illustration 247

(1) Engine oil temperature sensor

(2) Electrical connection for engine oil temperature sensor

1. Install engine oil temperature sensor (1). Tighten

the engine oil temperature sensor to a torque of

10 2 Nm (90 18 lb in).

2. Connect plug (2) for engine oil temperature

sensor (1).

g00770496

Illustration 248

(1) Electrical connection for injection actuation pressure sensor

i01479662

(2) Injection actuation pressure sensor

Injection Actuation Pressure

1. Disconnect plug (1) from injection actuation

Sensor - Remove and Install

pressure sensor (2).

SMCS Code: 1925-010

2. Remove injection actuation pressure sensor (2).

Removal Procedure

Installation Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.