Engine Oil Temperature Sensor - Remove and Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

Installation Procedure

NOTICE

Care must be taken to ensure that fluids are contained

NOTICE

during performance of inspection, maintenance, test-

Keep all parts clean from contaminants.

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

Contaminants may cause rapid wear and shortened

ing any compartment or disassembling any compo-

component life.

nent containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

products.

Dispose of all fluids according to local regulations and

mandates.

g00770526

Illustration 245

(1) Electrical connection for engine oil pressure sensor

(2) Engine oil pressure sensor

1. Install engine oil pressure sensor (2). Tighten

the engine oil pressure sensor to a torque of

10 2 Nm (90 18 lb in).

2. Connect plug (1) to engine oil pressure sensor

(2).

i01481086

Engine Oil Temperature Sensor

- Remove and Install

g00771060

Illustration 246

(1) Engine oil temperature sensor

SMCS Code: 1929-010

(2) Electrical connection for engine oil temperature sensor

Removal Procedure

1. Disconnect plug (2) for engine oil temperature

sensor (1).

NOTICE

2. Remove engine oil temperature sensor (1).

Keep all parts clean from contaminants.

Installation Procedure

Contaminants may cause rapid wear and shortened

component life.

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.