Engine Oil Pressure Sensor - Remove and Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

i01479715

Engine Oil Pressure Sensor -

Remove and Install

SMCS Code: 1924-010

Removal Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

g00770396

Illustration 242

(1) Coolant temperature sensor

NOTICE

(2) Electrical connection for coolant temperature sensor

Care must be taken to ensure that fluids are contained

1. Disconnect plug (2) from coolant temperature

during performance of inspection, maintenance, test-

sensor (1).

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

2. Remove coolant temperature sensor (1).

ing any compartment or disassembling any compo-

nent containing fluids.

Installation Procedure

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

NOTICE

suitable to collect and contain fluids on Caterpillar

Keep all parts clean from contaminants.

products.

Contaminants may cause rapid wear and shortened

Dispose of all fluids according to local regulations and

component life.

mandates.

g00770396

g00770526

Illustration 243

Illustration 244

(1) Coolant temperature sensor

(1) Electrical connection for engine oil pressure sensor

(2) Electrical connection for coolant temperature sensor

(2) Engine oil pressure sensor

1. Install coolant temperature sensor (1). Tighten

1. Disconnect plug (1) from engine oil pressure

the coolant temperature sensor to a torque of

sensor (2).

20 5 Nm (15 4 lb ft).

2. Remove engine oil pressure sensor (2).

2. Connect plug (2) to coolant temperature sensor

(1).