Atmospheric Pressure Sensor - Remove and Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

i01481332

Atmospheric Pressure Sensor

- Remove and Install

SMCS Code: 1923-010

Removal Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

g00772510

Illustration 241

(1) Atmospheric pressure sensor

NOTICE

Care must be taken to ensure that fluids are contained

1. Install atmospheric pressure sensor (1). Tighten

during performance of inspection, maintenance, test-

the atmospheric pressure sensor to a torque of

ing, adjusting and repair of the product. Be prepared to

10 2 Nm (90 18 lb in).

collect the fluid with suitable containers before open-

ing any compartment or disassembling any compo-

2. Connect the plug for atmospheric pressure

nent containing fluids.

sensor (1).

Refer to Special Publication, NENG2500, "Caterpillar

i01748101

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

Coolant Temperature Sensor -

products.

Remove and Install

Dispose of all fluids according to local regulations and

SMCS Code: 1906-010

mandates.

Removal Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.

NOTICE

Care must be taken to ensure that fluids are contained

during performance of inspection, maintenance, test-

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

g00772510

Illustration 240

ing any compartment or disassembling any compo-

(1) Atmospheric pressure sensor

nent containing fluids.

1. Disconnect the plug for atmospheric pressure

Refer to Special Publication, NENG2500, "Caterpillar

sensor (1).

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

2. Remove atmospheric pressure sensor (1).

products.

Dispose of all fluids according to local regulations and

Installation Procedure

mandates.

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened

component life.