Crankshaft Gear - Remove and Install

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

End By:

a. Install the pistons and connecting rods. Refer

to Disassembly and Assembly, "Pistons and

Connecting Rods - Install".

b. Install the camshaft idler gear. Refer to

Disassembly and Assembly, "Camshaft Idler

Gear - Remove and Install".

c. Install the front housing. Refer to Disassembly

and Assembly, "Housing (Front) - Install".

d. Install the cylinder head. Refer to Disassembly

and Assembly, "Cylinder Head - Install".

g00645876

Illustration 237

1. Use Tooling (A) in order to remove crankshaft

i01747939

gear (1) from crankshaft (2).

Crankshaft Gear - Remove and

Install

Installation Procedure

SMCS Code: 1204-010-GE

NOTICE

Keep all parts clean from contaminants.

Removal Procedure

Contaminants may cause rapid wear and shortened

Table 45

component life.

Required Tools

1. Position the woodruff key in the crankshaft.

Part

Tool

Part Description

Qty

Number

8B-7551

Bearing Puller

8B-7549

Puller Leg

3H-0465

Push-Puller Plate

6B-6682

Full Nut

8B-7560

Step Plate

1P-0820

Hydraulic Puller

9U-6600

Hand Hydraulic Pump

Start By:

g00645882

Illustration 238

a. Remove the crankshaft. Refer to Disassembly

and Assembly, "Crankshaft - Remove".

NOTICE

Hot oil and hot components can cause personal

Keep all parts clean from contaminants.

injury. Do not allow hot oil or hot components to

contact the skin.

Contaminants may cause rapid wear and shortened

component life.

2. Heat crankshaft gear (1) to a maximum

temperature of 316 C (600 F). Install crankshaft

gear (1) on the crankshaft.

End By:

a. Install the crankshaft. Refer to Disassembly and

Assembly, "Crankshaft - Install".