Turbocharger - Remove

TM 9-2320-312-24-2

Truck Engine

Disassembly and Assembly Section

NOTICE

Leakage of the high pressure engine oil lines can re-

sult in failure of the engine fuel system.

11. Install hose assembly (7) and lock the hose

assembly in position. Apply pressure in order to

snap the hose assembly into the quick coupling

for each of the ends.

Note: Be sure to check the connection by pulling

back on the hose.

i01745457

Turbocharger - Remove

SMCS Code: 1052-011

Removal Procedure

g00617515

Illustration 52

NOTICE

1. Remove bolts (1) and the gasket. Remove bolts

Keep all parts clean from contaminants.

(3) and tube assembly (2) from the turbocharger.

Contaminants may cause rapid wear and shortened

component life.

NOTICE

Care must be taken to ensure that fluids are contained

during performance of inspection, maintenance, test-

ing, adjusting and repair of the product. Be prepared to

collect the fluid with suitable containers before open-

ing any compartment or disassembling any compo-

nent containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar

Tools and Shop Products Guide" for tools and supplies

suitable to collect and contain fluids on Caterpillar

g00617565

Illustration 53

products.

2. Remove the bolts and the gasket in order to

Dispose of all fluids according to local regulations and

disconnect oil supply tube assembly (5) from the

mandates.

turbocharger.

3. Remove four nuts (4), turbocharger (6), and the

gasket from the exhaust manifold.