Water Pump -807640053

TM 9-2320-312-24-2

Specifications Section

(1) Air vent valve

i01847619

Cylinder Block Cover Group

(2) Closed dimension of the water temperature

regulator ......... 29.5 .5 mm (1.16 0.02 inch)

SMCS Code: 1201

(3) Minimum stroke of the water temperature

regulator at fully open temperature ..... 8.00 mm

(.315 inch)

i00669873

Water Pump

SMCS Code: 1361

g00941125

Illustration 29

Left side view of engine (typical example)

g00945478

Illustration 30

View A-A

(1) Cylinder block

(2) Gasket

g00292733

Illustration 28

The impeller cover is not shown.

Gasket (2) has a bead on one surface. Install the

gasket so that the bead is facing side cover (5).

(1) Clearance between the impeller and the

housing ....... 0.75 0.25 mm (.030 .010 inch)

(3) Six sleeves marked location (X).

(2) Seal

(4) Cover

(3) Height of seal ......................... 12.83 0.13 mm

Clean the face of the cover with solvent. Apply

(.505 .005 inch)

1U-8846 Liquid Gasket to the cover. Spread

uniformly on the face of the cover and around

(4) The filter should not extend beyond the surface

the bolt holes. The cover must be installed and

of the housing.

tightened within ten minutes.

(5) Dimension from the front face of the pulley to

(5) Side cover

the face of the housing ............ 103.8 0.3 mm

(4.09 .01 inch)

(6) Eight spacers marked location (Y).