LOWER CAB ASSEMBLY

TM 55-1740-200-14

a. Replace worn or deteriorated weatherstripping.

c. Replace cracked or fogged glass.

b. Replace cracked or fogged glass.

d. Replace worn or deteriorated weather stripping and

moulding.

c. Replace broken or damaged regulator and door

latch.

e. Replace missing attaching hardware.

d. Remove minor dents and paint chipped and rusted

f. Replace nonrepairable parts.

areas.

g. Reassemble in accordance with paragraph 4468.

e. Replace nonrepairable parts.

4-373. LOWER CAB ASSEMBLY

f. Reassemble in accordance with paragraph 4-477.

4-374. REPAIR. Refer to paragraph 4-23 for inspec-

4-379. DECK, FENDERS, AND RUNNING BOARDS.

tion and repair the lower cab in accordance with the

following procedures. (See figure 4-4.)

4-380. REPAIR. Refer to paragraph 4-35 for inspec-

tion and repair in accordance with the following proce-

a. Replace worn or deteriorated ventilator moulding

dures. (See figure 4-7.)

and gasket.

a. Remove dents and repaint chipped or rusted areas.

b. Replace broken or distorted ventilator latch spring.

b. Clean and retap dirty or damaged threaded holes.

c. Clean all instruction plates; replace illegible plates.

c. Replace nonrepairable parts.

d. Repair torn or cut seat coverings.

d. Install in accordance with paragraph 4481.

e. Remove dents and repaint chipped or rusted areas.

f. Replace missing attaching hardware.

4-381 . STEERING SYSTEM.

g. Clean and retap dirty or damaged threaded holes.

4-382. REPAIR. Refer to paragraph 4-39 for inspec-

tion and repair the steering system in accordance with the

h. Replace nonrepairable parts.

following procedures. (See figure 4-8.)

i. Reassemble in accordance with paragraph 4471.

a. Straighten bent or distorted rods and drag links.

4-375 . ENGINE COMPARTMENT HOOD.

b. Replace damaged or scored bushings.

4-376. REPAIR. Refer to paragraph 4-27 for inspec-

c. Replace broken or damaged hose assemblies.

tion and repair the hood in accordance with the following

procedures. (See figure 4-5.)

d. Replace defective flow divider.

a. Straighten minor dents in top and side panels.

NOTE

b. Replace broken latches.

Do not attempt to repair a defective flow

divider.

c. Straighten or replace bent hinge pins.

e. Replace clogged or damaged grease fittings.

d. Reassemble in accordance with paragraph 4474.

f. Clean clogged hydraulic tank breather.

4-377. DOOR ASSEMBLY.

g. Replace clogged filter element.

4-378. REPAIR. Refer to paragraph 4-31 for inspec-

tion and repair the door in accordance with the following

h. Replace damaged or worn ball seat spring and seats.

procedures. (See figure 4-6.)

4-103