Figure 4-5. Hood assembly (Sheet 1 of 2)

TM 55-1740-200-14

4-212. ENGINE COMPARTMENT HOOD.

h. Remove bushing (55). Remove four screws (54) and

left floor panel (56). Remove five screws (58) and left

floor panel (57). Remove six screws (60) and center floor

4-213. REMOVAL. See figure 4-5 and remove the

panel (59). Remove six screws (62) and right floor panel

engine compartment hood as follows:

(61).

i. Remove ten screws (64) and remove right floor plate

a. Unhook four fasteners (4). Remove eight screws (1),

(63). Remove twelve screws (66) and remove left floor

washer (2), and nuts (3). Remove side panels (6 and 7).

plate (65).

Figure 4-5. Hood assembly (Sheet 1 of 2)