Follow-on Maintenance -714670682

TM 5-2420-224-34

STEERING KNUCKLE AND FRONT AXLE FINAL DRIVE REPAIR (CONT)

WARNING

Spacer ring will be hot enough

to burn you on contact. Wear

heat resistant gloves when

handling hot ring.

12. HEAT new spacer RING (10) to 195F

(90C).

13. INSTALL spacer RING (10) on yoke (11).

14. INSTALL SHIM(S) (12) determined in step

11.

15. USING suitable PRESS and MANDREL,

INSTALL BEARING (9), gear (13), and yoke

(11).

16. INSTALL retaining RING (14).

17. APPLY COAT of SEALING COMPOUND to

mating SURFACE of housing (15) and

INSTALL HOUSING (15), bracket (16), and

11 screws (17). TIGHTEN SCREWS evenly

to 66-73 lb-ft (90-100 N.m).

NOTE

Follow-on Maintenance:

Install steering knuckle and front

axle final drive (page 5-16).

16-31/(16-32 Blank)