STARTER BRUSHES REPLACEMENT

TM 5-2420-224-34

STARTER BRUSHES REPLACEMENT

This task covers: a. Removal

b. Installation

INITIAL SETUP

Tools and Special Equipment:

References:

TOOI Kit, SC 5180-90-CL-N26

TM 5-2420-224-20

Shop Equipment, SC4910-95-CL-A31

Dowel (4), Appendix C, Item 1

Equipment condition:

Materials/Parts:

Reference

Condition Description

Screw (2)

TM 5-2420-224-20

Starter Removed

Gasket

Kit

REMOVE two sorews (1), end BELL (2), and gasket (3) from end bell (4), DISCARD SCREWS and

GASKET.

NOTE

Shims and washers may or may not be present. if present, note quanitity of shims and

washers removed to aid in assembly.

REMOVE and DISCARD lock washer RING (5), SHIM(S) (6), and WASHER(S) (7) from armature (8).

REMOVE two nuts (9), two washers (10), and end BELL (4) from housing (11).

IF DAMAGED, REMOVE BUSHING (12) from end bell (4).

4-6