FUEL FILTER-TO-FUEL METERING PUMP FUEL LINE

TM 5-2420-222-20-1

FUEL FILTER-TO-FUEL METERING PUMP FUEL LINE

This task covers:

a. Removal (page 2-292) c. Inspection/Replacement (page 2-294)

b. Cleaning (page 2-293) d. Installation (page 2-294)

INITIAL SETUP:

Tools

Personnel Required

Pan, drain

One

Wrench, adjustable, 0 to 1.322-inch

Wrench, open-end, 5/8-inch

Equipment Condition

Wrench, open-end, 3/4-inch

Battery ground cable disconnected

Materials/Parts

(page 2-696)

Rags, wiping (item 21, Appendix C)

Solvent, drycleaning (item 28, Appendix C)

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

WARNING

No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank

and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable

liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to

observe these precautions could cause serious injury.

1. Elbow (1)

Line (2)

a. Place drain pan underneath to catch

draining fuel.

b. Using 5/8-inch open-end wrench,

unscrew and take off.

2. Filter head (3)

Elbow (1)

a. Note relative position for proper

placement during installation.

b. Using 0 to 1.322-inch adjustable

wrench, unscrew and take out.

c. Plug filter head (3) page 2-137).

3. Elbow (4)

Line (2)

a. Place drain pan underneath to catch

draining fuel.

b. Using 5/8-inch open-end wrench,

unscrew and take off.

2-292