|
|
TM 5-2410-237-23
BLADE CUTTING EDGES AND END BITS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Tools and Special Tools
Wood cribbing, 4 in. x 4 in. x 12 in. long
Tool kit, general mechanic's (Item 122, WP 0250
Personnel Required
Shop equipment, common no. 1 (Item 103, WP
Two
Equipment Condition
Machine parked on level ground (TM 5-2410-237-
10)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Failure to follow this warning may cause injury.
NOTE
Left and right end bits weigh 47 lb (21 kg) and 45 lb (20 kg) respectively.
Outermost cutting edges weigh 60 lb (27 kg) each.
Middle cutting edge weighs 83 lb (38 kg).
REMOVAL
1.
Raise blade (1) approximately 12 in. (30.5 cm) and
1
6
2
block right and left pusharms securely at blade end.
2.
Shut off engine.
3.
Remove nuts (2), bolts (3) and end bits (4 and 5) as
needed.
4
4.
Remove nuts (6), bolts (7) and cutting edges (8, 9 and
10) as needed.
3
7 10
2
6
79
8
7
3
5
387-773
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |