|
|
TM 5-2410-237-23
WINCH LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Applicable Configuration
Tractor with winch
Tag, marker (Item 37, WP 0249 00)
Lockwasher (14)
Tools and Special Tools
O-ring (3, 6, 8 and 12)
Tool kit, general mechanic's (Item 122, WP 0250
Strap (21)
Shop equipment, common no. 1 (Item 103, WP
References
Materials/Parts
Equipment Condition
Cap set, protective (Item 2, WP 0249 00)
Engine OFF and cool (TM 5-2410-237-10)
Oil, lubricating (Item 23, 24, 25 or 26, WP 0249 00)
Rag, wiping (Item 29, WP 0249 00)
Floor plates removed (WP 0171 00)
WARNING
At operating temperature winch oil is hot. Allow oil to cool before disconnecting any lines. Failure to do so
could result in injury.
REMOVAL
CAUTION
Wipe area clean around all connections to be opened during removal. Cap oil lines and plug openings after removing
lines. Contamination of winch could result in premature failure.
1.
Remove fill plug from winch (WP 0179 00).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |