|
|
TM 5-2410-237-23
CHANGING WINCH ASSEMBLY OIL
THIS WORK PACKAGE COVERS
Draining Oil, Refilling Oil
INITIAL SETUP
References
Applicable Configuration
Tractor with winch
Tools and Special Tools
Tool kit, general mechanic's (Item 122, WP 0250
Equipment Condition
Shop equipment, common no. 1 (Item 103, WP
Tractor parked on level ground (TM 5-2410-237-
10)
Materials/Parts
Oil, lubricating (Item 23, 24, 25 or 26, WP 0249 00)
Winch oil warm (winch operated for about 5 min-
utes) (TM 5-2410-237-10)
Rag, wiping (Item 29, WP 0249 00)
Gasket (2 and 4)
Engine OFF and cool (TM 5-2410-237-10)
DRAINING OIL
CAUTION
Wipe area clean around plugs before they are removed to prevent contamination of winch oil.
NOTE
Place a suitable container under winch drain plug to collect drained oil. Dispose of oil IAW local policy
and ordinances. Ensure all spills are cleaned up.
Capacity is approximately 16 gal. (60.6 l).
1.
Remove fill plug (1) and gasket (2). Discard gasket.
1
2
2.
Remove drain plug (3) and gasket (4). Allow oil to
drain completely. Discard gasket.
NOTE
If noticeable amounts of metal particles
are present in winch oil, replacement of
winch may be required.
3.
Wipe clean and inspect drain plug (3). Install drain
plug with new gasket (4).
4.
Perform related winch maintenance.
4
a.
Clean magnetic strainer assembly. Replace mag-
5
3
netic strainer filter (WP 0184 00).
387-471
b.
Replace winch oil filter (WP 0185 00).
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |