|
|
TM 5-2410-237-23
FENDERS AND FENDER MOUNTING REPLACEMENT - CONTINUED
0170 00
INSTALLATION - CONTINUED
NOTE
Lightly coat new O-rings with clean oil before installation.
17.
If equipped with winch, install new O-ring (7) in hose
2,4
3
(5). Connect hose to connector (6) on winch gear
pump (3).
18.
Install new O-ring (4) in hose (1). Connect hose to
connector (2) on winch gear pump (3).
387-306
6,7
1
5
19.
Install the following:
a.
Blade (lift and tilt) control valve (WP 0201 00).
b.
Steering brake pedals and linkage (WP 0146 00).
c.
Steering clutch levers and linkage (WP 0148 00).
d.
Fuel tank (WP 0052 00).
e.
ROPS mounting brackets and plates (WP 0165 00).
20.
If R.H. fender was removed, install:
a.
Hydraulic tank (WP 0226 00).
b.
Toolbox (WP 0177 00).
21.
If L.H. fender was removed, install:
a.
Seat and seat base assembly (WP 0172 00).
b.
Battery box (WP 0161 00).
22.
Operate machine and check for proper operation (TM 5-2410-237-10).
END OF WORK PACKAGE
0170 00-7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |