 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
HYDRAULIC TANK REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts - Continued
Tools and Special Tools
Tool kit, general mechanic's (Item 122, WP 0250
Tag, marker (Item 37, WP 0249 00)
Nut, self-locking (8)
Shop equipment, general purpose repair (Item 106,
O-ring (6)
Link, lifting (Item 134, WP 0250 00)
References
Sling, nylon (Item 109, WP 0250 00)
Lifting equipment, 500 lb capacity
Personnel Required
Materials/Parts
Two
Cap set, protective (Item 2, WP 0249 00)
Equipment Condition
Oil, lubricating (Item 23, 24 or 25, WP 0249 00)
Blade control valve removed (WP 0201 00)
Rag, wiping (Item 29, WP 0249 00)
REMOVAL
CAUTION
5
Install protective caps and plug openings
in tank and hoses after removal of
hydraulic hoses, to ensure contamination
does not enter hydraulic system.
NOTE
Use a suitable container to capture
any residual oil that may drain from
3
hoses as they are disconnected. Dis-
pose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned
6 (HIDDEN)
up.
1,2
Tag hoses as they are removed to
ensure correct installation.
1.
Remove four capscrews (1), washers (2), flange halves
4
(3) and hydraulic pump hose (4) from side of tank (5).
387-691
2.
Remove O-ring (6) from hydraulic pump hose (4).
Discard O-ring.
3.
Remove remaining hydraulic hoses from tank (5). Dis-
card all hose connection O-rings.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals